Specification 　 　 The figures in this table are 220V/60HZ D-Single Platen(单滑板),R-Rotary Table(圆盘),DM-Double platen(双滑板) Model Unit YT-450 YT-450D YT-450DM 射出系统 Screw Diameter mm 25 28 30 35 25 28 30 35 25 28 30 35 Injection Pressure kg/cm2 2509 2000 1742 1280 2509 2000 1742 1280 2509 2000 1742 1280 Theoretical Shot Volume cm3 59 74 85 115 59 74 85 115 59 74 85 115 Max Shot Weight(PS) g 54 67 77 105 54 67 77 105 54 67 77 105 oz 1.9 2.3 2.7 3.7 1.9 2.3 2.7 3.7 1.9 2.3 2.7 3.7 Injection Rate cm3/sec 36 45 52 71 36 45 52 71 36 45 52 71 Screw Stroke mm 120 120 120 Screw Speed Max rpm 0-190 0-190 0-190 Nozzie Contact Force tons 2.4 2.4 2.4 Nozzle Retraction Stroke mm 180 180 180 Number of Temperature Control - 3 3 3 Material Hopper Capacity 　 20 20 20 锁模系统 Clamping Force tons 45 45 45 Opening Force tons 8.3 8.3 8.3 Platen Size mm 580×430 580×430 580×430 Distance Between Tie Bare mm 400×250 400×250 400×250 Min Mold Height mm 150/210 150/210 150/210 Opening Stroke mm 200 200 200 Max Open Daylight mm 350/410 350/410 350/410 Ejector Force tons 1.3 1.3 1.3 Ejector Stroke mm 45 95 95 滑模系统 Slide Stroke mm - 420 420 Max Mold Weight kg - 120 120 Station Clearance mm - ±0.02 ±0.02 油压电力系统 Max Hydraulic Pressure kg/cm2 140 140 140 Pump Output liters/min 39 39 39 Oil Reservoir Capacity liters 130 130 130 Cooling Water Consumption liters/hr 600-800 600-800 600-800 Pump Motor Power kw 5.5 5.5 5.5 Barrel Heating Power kw 3.5 3.5 3.5 Total Wattage kw 9 9 9 其他 Machine Weight tons 1.4 1.5 1.6 Machine Dimensions m 1.7×1.35×2.15 1.8×1.35×2.15 1.9×1.55×2.15 Shipping Weight tons 1.7 1.8 1.9 Shipping Measurements m 1.9×1.5×2.2 2.0×1.5×2.2 2.1×1.7×2.2 天一保有设计变更之权利,恕不另行通知. BACK NEXT

2004 © 宁波市天一机械有限公司 版权所有